Hydraulic Hose & Fittings
Raleigh Durham Rubber & Gasket is your premier hydraulic hose supplier and a trusted maker of custom hydraulic hose assemblies. We are equipped to handle your hydraulic hose needs efficiently, whether you require a small assembly made while you wait or extensive work for a large project. Our expert staff is ready to assist you in selecting the optimal hydraulic hose specification that is best suited for your particular application. Additionally, our experienced hose technicians will meticulously construct your assembly using high-quality components, all in accordance with rigorously tested specifications. The end result is a rugged and flexible hydraulic hose assembly, precisely engineered and ready to perform reliably in the field under various conditions.
WE MAKE CUSTOM HYDRAULIC HOSE ASSEMBLIES!
HYDRAULIC HOSE
SAE100R1AT
Cover: Black, oil resistant- Synthetic Rubber (Bio-Oil Resistant)
Tube: Black, oil resistant, Nitrile Reinforcement: one layer of high tensile steel wire
Temperature Range: -40° F to 260° F
MSHA Approved Flame-Resistant
SAE100R2AT
Cover: Black, oil and abrasion resistant- Neoprene
Tube: Black, oil resistant, Nitrile (BTR)
Temperature Range: -40° F to 260° F
Reinforcement two braids of high tensile steel wire
MSHA Approved Flame-Resistant
SAE100R16AT
Meets or exceeds SAE 16 types S, EN857 25C, ISO 11237-1 Type 25C
Cover: Black, oil and abrasion resistant- Neoprene
Tube: Black, oil resistant, Nitrile (BTR)
Temperature Range: -40° F to 260° F
Reinforcement two braids of high tensile steel wire
MSHA Approved Flame-Resistant
SUPERFLEX 3000
Cover: Black, oil and abrasion resistant- Neoprene
Tube: Black, oil resistant, Nitrile (BTR)
Reinforcement: Two braids of high tensile steel wire
Temperature Range: -40° F to 212° F
MSHA Approved Flame-Resistant
SAE100R12
Cover: Black, oil and abrasion resistant- Neoprene
Tube: Black, oil resistant, Nitrile
Reinforcement four spiral layers of high tensile steel wire
Temperature Range: -40° F to 212° F
MSHA Approved Flame-Resistant
4SH
Cover: Black, oil and abrasion resistant- Synthetic
Tube: Black, oil resistant, Synthetic
Reinforcement: four spiral layers of high tensile steel wire
Temperature Range: -40° F to 212° F
MSHA Approved Flame-Resistant
PUSH-ON HOSE
Cover: Black Neoprene
Tube: Nitrile (Bio-Oil Resistant)
Reinforcement: One Fiber braid
Temperature Range -40° to 212° F
PRESSURE WASHER HOSE
Working Pressure: 4,000 PSI
Reinforcement: One Braid of High tensile steel wire
Temperature- 40° to 212° F Tube-synthetic rubber
Also available in pre-made assemblies
HYDRAULIC FITTINGS
JIC FITTINGS
JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel. JIC Fitting hydraulic connections are common in most fluid power systems. Both male and female components have 37 degree seats. The seal is made by establishing contact between the male flared and the female coned seat. This is considered a mechanical connection. There are three components that make a tubing assembly; fitting, flare nut and sleeve.
NPT FITTINGS
American National Standard Pipe Thread standards, often called national pipe thread standards for short, are US national technical standards for screw threads used on threaded pipes and pipe fittings. They include both tapered and straight thread series for various purposes including rigidity, pressure-tight sealing, or both.
API THREAD
American Petroleum Institute approved extended male thread.
O-RING FACE SEAL
ORFS offers excellent leak protection. The male fitting has a straight thread and O-ring in the face. The female has a straight thread and a machined flat face. The seal takes places by compressing the O-ring onto the flat face of the female, similar to a split flange fitting. The threads hold the connection mechanically.
O-RING BOSS
SAE O-ring boss fittings use straight thread and an O-ring (of either Buna N or Viton material, depending on the type of hydraulic fluid) to create a seal between the male and female fitting. Compression of the male fitting O-ring into the female chamfer cone seat creates a strong leak proof connection. SAE ORB adapter fittings are an excellent choice for medium and high pressure applications.
FLANGE FITTINGS
SAE Flanges is a range of high pressure hydraulic flange which is made in accordance to SAE J518 standards. The acronym SAE stands for Society of Automotive Engineers. These flanges are used on oil hydraulic systems in many fields (shipbuilding, mobile hydraulic equipment, machine tools, earth moving machines, etc… ) and where there is passage of oil under pressure.
SAE FITTINGS
SAE is Society of Automotive engineers. These fittings are commonly used in refrigeration, automotive and low pressure applications. SAE male has 45° flare which seals against 45° seat in female. Male can also seal against 45° flared tubing with nut and sleeve. 7/16 - 20, 1/2 - 20, 3/4 - 16 & 7/8 - 14 are the same thread form as JIC 37° flare. some fittings in these sizes have both JIC 37° & SAE 45° seats.
DKL METRIC FITTINGS
DKL is DICHT KEGEL LEICHT – Metric Light Series 24° Cone.
DKOS METRIC FITTINGS
DKOS is DICHT KEGEL O RING SCHWER – Metric Heavy O Ring Series 24° Cone.
DKOL METRIC FITTINGS
DKOL is DICHT KEGEL O RING LEICHT – Metric Light O Ring Series 24° Cone.
DKS METRIC FITTINGS
DKS is DICHT KEGEL SCHWER - Metric Heavy Series 24° Cone.
JIS FITTINGS
The Japanese Industrial Standard fitting 30° is similar to the SAE 37° flare connection. However, the flare angle and dimensions are different. The threads are similar to BSPP.
BSP FITTINGS
British Standard Pipe fittings and connectors are available in two versions, with parallel threads (BSPP) or tapered threads (BSPT).